EX35 AWD V6-3.5L (VQ35HR) (2009)
-
Replace the crash zone sensor if it has been dropped or sustained an impact.
-
Replace the crash zone sensor of deployed driver air bag and deployed front passenger air bag.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Never use the old fixing nuts after removal, replace with the new nuts.
-
If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioning parts, reset the memory using
self-diagnosis or CONSULT-III. Refer to See: Restraint Systems/Air Bag Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Consult-III Function, "CONSULT-III
Function".
-
After the work is completed, check that no system malfunction is detected by air bag warning lamp.