EX35 AWD V6-3.5L (VQ35HR) (2009)
Tire Pressure Sensor: Testing and Inspection
Diagnosis Procedure
TIRE PRESSURE RECEIVER
Description
The tire pressure receiver (1) receives the air pressure signal transmitted by the transmitter in each wheel.
TIRE PRESSURE RECEIVER
Diagnosis Procedure
1.CHECK TIRE PRESSURE RECEIVER SIGNAL
1. Turn the ignition switch ON.
CAUTION:
Never start the engine.
2. Check tire pressure receiver connector and ground signal with oscilloscope.
Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK TIRE PRESSURE RECEIVER INPUT VOLTAGE
1. Disconnect tire pressure receiver connector.
2. Check voltage between tire pressure receiver connector and ground.
Is the inspection result normal?