EX35 AWD V6-3.5L (VQ35HR) (2009)
Transmission Temperature Sensor/Switch: Service and Repair
Removal and Installation
A/T FLUID TEMPERATURE SENSOR 2
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Drain ATF through drain plug.
3. Remove exhaust mounting bracket. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Exploded View.
4. Disconnect heated oxygen sensor 2 connectors (A).
5. Remove heated oxygen sensor 2 harness (B) from clips (1).
6. Remove bracket (2) from transmission assembly.
7. Remove clips (1).
8. Remove oil pan (2) and oil pan gasket.
9. Remove magnets (1) from oil pan.
10. Disconnect A/T fluid temperature sensor 2 connector (A).