EX35 AWD V6-3.5L (VQ35HR) (2009)
CAUTION:
Be careful not to damage connector.
11. Disengage terminal clip ( ).
12. Remove A/T fluid temperature sensor 2 (1) with bracket (2) from control valve with TCM.
13. Remove bracket (1) from A/T fluid temperature sensor 2 (2).
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
-
Be careful not to damage connector.
-
Never reuse drain plug and drain plug gasket.
-
Adjust bolt hole of bracket to bolt hole of control valve with TCM when installing A/T fluid temperature sensor 2 (with bracket).