EX35 AWD V6-3.5L (VQ35HR) (2009)
Valve Body: Service and Repair
Removal and Installation
CONTROL VALVE WITH TCM
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Drain ATF through drain plug.
3. Remove exhaust mounting bracket. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Exploded View.
3. Remove exhaust mounting bracket. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Exploded View.
4. Disconnect heated oxygen sensor 2 connectors (A).
5. Remove heated oxygen sensor 2 harness (B) from clips (1).
6. Remove bracket (2) from transmission assembly.
7. Disconnect A/T assembly connector.
8. Remove snap ring (1) from A/T assembly connector (A).
9. Push A/T assembly connector (A).
CAUTION:
Be careful not to damage connector.
10. Remove clips (1).