EX35 AWD V6-3.5L (VQ35HR) (2009)
Drive/Propeller Shaft: Removal and Replacement
Exploded View
FRONT PROPELLER SHAFT
Exploded View
Removal and Installation
FRONT PROPELLER SHAFT
Removal and Installation
REMOVAL
1. Shift the transaxle to the neutral position, and then release the parking brake.
2. Remove engine undercover with a power tool.
3. Remove front cross bar.
4. Remove the three-way catalyst (right bank) with a power tool. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Manifold/Service and Repair/Exploded View.
5. Remove heat bracket (1).
6. Put matching mark onto propeller shaft flange yoke and final drive companion flange.