EX35 AWD V6-3.5L (VQ35HR) (2009)
Power Window Switch: Service and Repair
Power Window Main Switch
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). Refer to See: Window Regulator/Front Door Window Regulator/Service and Repair/Removal
and Replacement/Exploded View and See: Window Regulator/Front Door Window Regulator/Service and Repair/Removal and
Replacement/Removal and Installation.
2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH and RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to See: Testing and
Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal/Special Repair Requirement.