EX35 AWD V6-3.5L (VQ35HR) (2009)
Rear Door Window Regulator: Removal and Replacement
Removal and Installation
REAR REGULATOR
Removal and Installation
REMOVAL
1. Remove the rear door finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and
Repair/Removal and Installation.
2. Remove the rear door glass. Refer to See: Window Glass/Rear Door Window Glass/Service and Repair/Removal and Replacement/Removal and
Installation.
3. Remove the regulator mounting bolts (B), the nuts (A), disconnect the power window motor harness connector (C) and then remove the regulator
from the rear door panel.
4. Remove the rear door glass run.
INSTALLATION
Install in the reverse order of removal.
Exploded View
REAR REGULATOR
Exploded View