EX35 RWD V6-3.5L (VQ35HR) (2008)
1. Locate the Primary Position Limit Switch (switch) on the reclining device. See Figure 2 and 3.
2. Loosen, but do not remove, the two (2) screws securing the switch (see Figure 3).
3. Rotate the switch as much as possible toward the cam roller, and then hold it in this position while tightening the screws (see Figure 4).
^ Switch adjustment is now complete.
Rear Seat Seatback Assembly And Installation
1. Reassemble the rear seatback.
^ Refer to the appropriate section of the ESM as needed.