EX35 RWD V6-3.5L (VQ35HR) (2008)
/Page-1319002.png)
2. Open the center console lid and remove the finisher shown in Figure 1.
^ The finisher is secured by (2) pawl-type tabs. See Figure 2.
^ From the back of the center console push the two tabs forward to release the finisher.
3. Remove the center console lid.
^ The lid is secured by three (3) screws.
^ Place the lid in an area where it will not be damaged such as on a work bench with suitable covering.
4. Remove the inner console panel shown in Figure 4.
a. From either front seat using both hands:
