EX35 RWD V6-3.5L (VQ35HR) (2008)
4. Remove screws (A) and connector (1), and then remove side camera (LH).
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to AV-438, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR): Special Repair
Requirement". See: Radio, Stereo, and Compact Disc/Service and Repair/Procedures/Bose Audio With Navigation/Calibrating Camera Image
(Around View Monitor)
CAUTION: Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each
camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.
Side Camera RH
SIDE CAMERA RH
AV-928 Exploded View
Exploded View
Removal and Installation
REMOVAL
1. Remove door mirror glass (passenger side).
2. Remove screws (A) and door mirror actuator connector, and then door mirror actuator (1).
3. Remove door mirror under cover.