EX35 RWD V6-3.5L (VQ35HR) (2008)
CAUTION: Do not use a material for remover tool (A) which could damage door panel.
5. Remove front door sash molding.
REAR DOOR SASH MOLDING
1. Remove rear door weather-strip.
2. Release roof portion of glass run.
3. Remove rear door sash molding (1) connection between door panel and molding from glass run side, using a remover tool (A).
CAUTION:
-
Apply protection tape (B) around the door sash.
-
Do not use a material for remover tool (A) which could damage door panel.
4. Remove rear door sash molding.
INSTALLATION
Install in the reverse order of removal.