EX35 RWD V6-3.5L (VQ35HR) (2008)
2. Remove the clips (A) from the back door finisher inner (1) with tool.
3. Disengage the luggage room lamp fixing pawls with a tool, disconnect the harness connector (A) then remove the lamp (1) (LH/RH)
4. Disengage pull handle finisher (1) fixing pawls with remover tool (A) and then remove pull handle finisher (1).
5. Disengage the back door finisher lid (1) fixing pawls, then remove the back door finisher lid (1) with remover tool (A).
6. Remove the back door finisher inner.
1. Insert remover tool (A) between back door finisher inner (1) and back window glass, pull downwards to disengage clips as shown in the figure.