EX35 RWD V6-3.5L (VQ35HR) (2008)
^
Position the tips of two fingers just below the power outlet door
and
^
the tips of another two fingers just below the USB connector door then lift up the panel to detach.
b. Disconnect the harness connectors from the inner console panel.
5. Remove the center console assembly from the vehicle.
^ Place the center console assembly on a work bench with suitable covering.
^ Position the center console assembly upside down so that it is resting on its top.
6. Remove the switch panel.
a. Remove the six (6) screws shown in Figure 6.