EX35 RWD V6-3.5L (VQ35HR) (2008)
Brake Pedal Assy: Service and Repair
Removal and Installation
BR-18 Exploded View
REMOVAL
1. Remove instrument lower panel LH.
2. Remove steering column assembly.
3. Disconnect the stop lamp switch and ASCD brake switch harness connectors.
4. Turn the stop lamp switch and ASCD brake switch counterclockwise to remove the stop lamp switch and ASCD brake switch.
5. Remove snap pin and clevis pin from clevis of brake booster.
6. Remove cowl top cover.
7. Remove instrument panel assembly.
8. Slide the steering member rearward.
9. Remove brake pedal assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
^
Apply the multi-purpose grease to the clevis pin and the mating faces. (Not necessary if grease has been already applied)
NOTE:
The clevis pin may be inserted in either direction.
Inspection and Adjustment
INSPECTION AFTER REMOVAL