EX35 RWD V6-3.5L (VQ35HR) (2008)
NOTE:
Stopper pin should be attached when timing chain (secondary) is removed.
INSTALLATION
1. Install timing chain tensioners (secondary) on both sides of cylinder head.
^
Install timing chain tensioners (1) with its stopper pin (C) attached.
Bank 1 side (A): Sliding part facing downward
Bank 2 side (B): Sliding part facing upward
2. Install valve lifter.
^
Install it in the original position.
3. Install camshafts.
^
Follow your identification marks made during removal, or follow the identification marks that are present on new camshafts for proper
placement and direction.
<---: Engine front