EX35 RWD V6-3.5L (VQ35HR) (2008)
Headlamp Bulb: Service and Repair
Xenon Type
FRONT COMBINATION LAMP
HEADLAMP BULB (LO)
1. Remove the fender rubber protector in the engine room. Keep a service area.
2. Rotate the resin cap counterclockwise and unlock it.
3. Rotate the bulb socket counterclockwise and unlock it.
4. Remove the retaining spring lock. And then remove the bulb from the headlamp housing assembly.
CAUTION: Never break the xenon bulb ceramic tube when replacing the bulb.
HEADLAMP BULB (HI)
1. Remove the washer tank inlet*.
*:When replace a right.
2. Disconnect the headlamp (HI) bulb connector.
3. Rotate the bulb socket counterclockwise and unlock it.
4. Remove the bulb socket from the headlamp housing assembly.