EX35 RWD V6-3.5L (VQ35HR) (2008)
8. Disconnect one-touch joint between high-pressure pipe 1 (1) and high-pressure pipe 2 (2) with disconnector (A) (SST: 9253089908).
CAUTION: Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
9. Remove high-pressure pipe 1.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings with new ones. Then apply compressor oil to them when installing.
-
Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.
-
Insert piping securely until a click is heard.
-
After piping connection is completed, pull male-side piping by hand to make sure that connection does not come loose.
-
Check for leakages when recharging refrigerant.