EX35 RWD V6-35L (VQ35HR) (2008) | Power and Ground Distribution | Multiple Junction Connector
Multiple Junction Connector: Description and Operation
HARNESS CONNECTOR
Description
HARNESS CONNECTOR (TAB-LOCKING TYPE)
-
The tab-locking type connectors help prevent accidental looseness or disconnection.
-
The tab-locking type connectors are disconnected by pushing or lifting the locking tab(s). Refer to the figure below.
CAUTION: Never pull the harness or wires when disconnecting the connector.
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
-
A new style slide-locking type connector is used on certain Systems and components, especially those related to OBD.
-
The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection.
-
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure below.
CAUTION:
-
Never pull the harness or wires when disconnecting the connector.
-
Be careful not to damage the connector support bracket when disconnecting the connector.