EX35 RWD V6-3.5L (VQ35HR) (2008)
Air Flow Meter/Sensor: Service and Repair
AIR CLEANER AND AIR DUCT
EM-27 Exploded View
Removal and Installation
REMOVAL
1. Disconnect mass air flow sensor harness connector.
2. Disconnect PCV hose.
3. Remove air cleaner case with mass air flow sensor and air duct, disconnecting each joints.
^
Add marks as necessary for easier installation.
4. Remove mass air flow sensor from air cleaner case, as necessary.
CAUTION:
Handle mass air flow sensor with the following cares.
^
Never shock mass air flow sensor.
^
Never disassemble mass air flow sensor.
^
Never touch mass air flow sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.