EX35 RWD V6-3.5L (VQ35HR) (2008)
Fuel Injector: Service and Repair
FUEL INJECTOR AND FUEL TUBE
EM-37 Exploded View
CAUTION:
Never remove or disassemble parts unless instructed as shown in the figure.
Removal and Installation
REMOVAL
WARNING:
^
Put a "CAUTION: FLAMMABLE" sign in the workshop.
^
Be sure to work in a well ventilated area and furnish workshop with a CO2 fire extinguisher.
^
Never smoke while servicing fuel system. Keep open flames and sparks away from the work area.
^
Never drain engine coolant when the engine is hot to avoid the danger of being scalded.
1. Release fuel pressure. Refer to EC-538, "Inspection".
2. Disconnect battery cable from the negative terminal.
3. Remove engine cover with power tool.
4. Remove air cleaner case and air duct (RH and LH).
5. Remove intake manifold collector.