infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Recall P8202 - Air Bag Control Module Software Update|Page 329 > < Additional Service When Replacing Control Unit|Page 319
Page 1
background image

Technical Service Bulletin # 08-009A

Date: 080214

Recall P8202 - Air Bag Control Module Software Update

Reference: ITB08-009A

Date: February 14, 2008

VOLUNTARY RECALL CAMPAIGN 2008 EX35 AIR BAG CONTROL MODULE REPROGRAM

This bulletin has been amended. The Claims Information has been changed and the NHTSA # has been added. Please discard all copies of the earlier
version.

CAMPAIGN ID #: P8202 

NHTSA # 08V-066 

APPLIED VEHICLE: 2008 EX35 (J50) 

APPLIED VINs: 
JNKAJ09E(*)8M 300033 - 303627 
JNKAJ09F(*)8M 350064 - 356651 

NOTE:

Use Infiniti Net to confirm campaign eligibility

INTRODUCTION

Infiniti has decided that a defect which relates to motor vehicle safety exists in some 2008 model year Infiniti EX35 vehicles. Due to incorrect software
programming, the Air Bag Control Unit may cause the passenger air bag not to operate as designed if the vehicle battery becomes significantly
discharged. This could result in the passenger air bag not inflating in a crash in which it was designed to do so, and increasing the risk of injury. In order
to prevent this from occurring, Infiniti is conducting a Voluntary Safety Recall to reprogram the Airbag Control Unit in affected vehicles free of charge
for parts or labor.

IDENTIFICATION NUMBER

Infiniti has assigned identification number P8202 to this campaign. This number must appear on all communications and documentation of any nature
dealing with this campaign.

NUMBER OF VEHICLES POTENTIALLY AFFECTED

The number of vehicles potentially affected by this campaign is approximately 4,850

DEALER RESPONSIBILITY

It is the dealer's responsibility to check Infiniti Net for the campaign status on each vehicle falling within the range of this voluntary safety recall which
for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles
in a dealer's inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale.
Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles,
Infiniti strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

SERVICE PROCEDURE

IMPORTANT:

Before starting, make sure:

^

ASIST on the Toughbook(R) PC has been freshly synchronized (updated).

^

Your C-III has software version 8.15.01.07.00 or later.

^

A screen print for Warranty documentation can be done from C-III during this process while still cable-connected to the vehicle.

1. Use the USB cable to connect the Vehicle Interface (VI) to the Toughbook(R) PC and then connect the VI to the vehicle.

2. Connect the AC Adapter to the Toughbook(R) PC.

Recall P8202 - Air Bag Control Module Software Update|Page 329 > < Additional Service When Replacing Control Unit|Page 319