EX35 RWD V6-3.5L (VQ35HR) (2008)
Power Seat Switch: Service and Repair
Lumbar Support Switch
LUMBAR SUPPORT SWITCH
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
1. Remove the seat cushion outer finisher (1).
2. Remove the lumbar support switch (2) from the seat cushion outer finisher. With flat bladed screw driver (A).
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to clamp the harness to the right place.