EX35 RWD V6-3.5L (VQ35HR) (2008)
16. Tap rear extension assembly with a soft hammer (A).
17. Remove rear extension assembly (with needle bearing) from transmission case.
18. Disconnect revolution sensor connector (A).
CAUTION: Be careful not to damage connector
19. Disengage terminal clip (<---).
20. Remove revolution sensor (1) from transmission case.
<---: Bolt
CAUTION:
^
Do not subject it to impact by dropping or hitting it.
^
Do not disassemble.
^
Do not allow metal filings, etc. to get on the sensor's front edge magnetic area.