EX35 RWD V6-3.5L (VQ35HR) (2008)
16. Remove parking actuator support (1) from rear extension.
17. Remove parking pawl (with return spring) (1) and pawl shaft (2) from rear extension.
18. Remove return spring (1) from parking pawl (2).
19. Remove rear oil seal (1) from rear extension using flat-blade screwdriver (A).
CAUTION: Be careful not to scratch rear extension.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
^
Do not reuse seal rings and drain plug gasket.
^
Apply petroleum jelly to needle bearing and seal rings.