EX35 RWD V6-3.5L (VQ35HR) (2008)
7. Disconnect heated oxygen sensor 2 harness connectors (A).
<---: Vehicle front
<---: Bolt
8. Remove heated oxygen sensor 2 harness (B) from clips (1).
9. Remove bracket (2) from transmission assembly.
10. Remove clips (1).
3: Drain plug
<---: Vehicle front
<---: Oil pan mounting bolt
11. Remove oil pan (2) and oil pan gasket.
12. Support A/T assembly with a transmission jack.
CAUTION: When setting transmission jack, place wooden blocks to prevent from damaging control valve with TCM and transmission
case.
13. Remove rear engine mounting member with power tool.
14. Remove engine mounting insulator (rear).
15. Remove tightening bolts for rear extension assembly and transmission case.
1: Self-sealing bolt
A: Bolt