EX35 RWD V6-3.5L (VQ35HR) (2008)
12. Install boot bands securely as shown in the figure.
CAUTION: Never reuse boot band.
13. Secure housing and shaft, and then make sure that they are in the correct position when rotating boot. Install them with boot and when the
mounting positions become incorrect.
CAUTION: Never reuse boot band.
Inspection
INSPECTION AFTER REMOVAL
^
Move joint up/down, left/right, and in the axial direction. Check for any rough movement or significant looseness.
^
Check boot for cracks or other damage, and also for grease leakage.
^
If a malfunction is found, disassemble drive shaft, and then replace with new one.