EX35 RWD V6-3.5L (VQ35HR) (2008)
Transmission Temperature Sensor/Switch: Service and Repair
A/T FLUID TEMPERATURE SENSOR 2
TM-168 Exploded View
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Drain ATF through drain plug.
3. Remove exhaust mounting bracket.
4. Disconnect heated oxygen sensor 2 harness connectors (A).
<---: Vehicle front
<---: Bolt
5. Remove heated oxygen sensor 2 harness (B) from clips (1).
6. Remove bracket (2) from transmission assembly.