EX35 RWD V6-3.5L (VQ35HR) (2008)
Windshield Washer Spray Nozzle: Service and Repair
Front
FRONT WASHER NOZZLE AND TUBE
REMOVAL
1. Open the hood.
2. Use the stop point of washer nozzle (1) as the support point and rotate nozzle to remove it from body, while pushing nozzle spray point side along
the hood.
3. Remove the washer tube (2) from the washer nozzle.
INSTALLATION
1. Install washer tube into the washer nozzle.
2. Install the washer nozzle to the hood.
3. Adjust the washer nozzle spray position. Refer to WW-103, "Inspection and Adjustment". See: Testing and Inspection/Front
CAUTION: The spray positions differ. Check that left and right nozzles are installed correctly.