FX35 AWD V6-3.5L (VQ35HR) (2009)
Radio/Stereo: Service and Repair
Removal and Installation
Without Navigation
AV CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove front display unit. Refer to See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and
Repair/Front Display Unit/Removal and Installation/Without Navigation.
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
Navigation (Single Monitor)
AV CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove front display unit. Refer to See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and
Repair/Front Display Unit/Removal and Installation/Navigation (Single Monitor).
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
Navigation (Twin Monitor)
AV CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove front display unit. Refer to See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and
Repair/Front Display Unit/Removal and Installation/Navigation (Twin Monitor).
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.