FX35 AWD V6-3.5L (VQ35HR) (2009)
c. Remove the screw shown in Figure 2.
d. Turn the steering wheel 90° to the left of center.
e. Remove the left side trim cover; just like the one shown in Figure 1.
f. Remove the left side screw; just like the one shown in Figure 2.
FX
a. Turn the steering wheel 90° to the right of center.
b. Remove the trim cover that's covering the screw shown in Figure 3.
^ Pull the trim cover straight back, toward the driver seat.
^ If needed, use a plastic trim tool.
c. Remove the screw shown in Figure 3.
d. Turn the steering wheel 90° to the left of center.
e. Remove the left side trim cover and screw just like the one shown in Figure 3.