FX35 RWD V6-3.5L (VQ35DE) (2003)
3.
Using needle-nose pliers remove the springs from both sides of the pocket (see Figures 1 and 2).
^
The front and rear springs are different. Don't mix them up.
^
Remove one spring at a time.
^
First remove the end of the spring that is in the hole with the black plastic spacer.
^
Then remove the other end of the spring.
NOTE:
You should be able to reuse the springs, but if a spring is bent or otherwise damaged it will need to be replaced. New springs are listed in the
Parts Information.