FX35 RWD V6-3.5L (VQ35DE) (2003)
Memory Positioning Systems: Testing and Inspection
Description of On-Board Diagnostics
CONSULT-II Function
The following functions are performed by combining data received and command transmitted via the communication line from the driver seat control
unit.
Work Flow
Work Flow
1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Perform the preliminary check, refer to "Preliminary Check".
4. Perform the CAN communication inspection using CONSULT-II, refer to "CONSULT-II Function".
5. Perform the self-diagnosis. Refer to "Can Communication Inspection Using CONSULT-II (Self-diagnosis)".
6. Repair or replace depending on the self-diagnostic results.
7. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
8. Does the automatic drive positioner system operate normally?
If it is normal, GO TO 8.
If it is not normal, GO TO 3.
9. INSPECTION END