FX35 RWD V6-3.5L (VQ35DE) (2003)
Memory Positioning Systems: Description and Operation
Automatic Drive Positioner
AUTOMATIC DRIVE POSITIONER
Manual Operation
The driving position [seat position, steering wheel position (tilt, telescopic) and door mirror position] can be adjusted with the power seat switch or ADP
steering switch or door mirror remote control switch.
NOTE:
-
The seat can be manually operated with the ignition switch OFF.
-
The door mirrors can be manually operated with the ignition switch turned ACC or ON.
Automatic Operation
NOTE:
-
Disconnecting the battery erases the stored memory.
-
After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open) -> OFF (close) -> ON (open), the
Entry/ Exiting operation becomes possible.
-
After exiting operation is carried out, return operation can be operated.
NOTE: During automatic operation, if the ignition switch is turned ON -> START, the automatic operation is suspended. When the ignition switch
returns to ON, it resumes.
System Description
-
The system automatically moves the driver seat to facilitate entry/exit to/from the vehicle. The automatic driver positioner control unit can also
store the optimum driving positions (driver seat, pedal position and door mirror position) for 2 people. If the driver is changed, one-touch
operation allows changing to the other driving position.
-
The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed as desired, using the display unit in the
center of the instrument panel. The set content is transmitted by CAN communication, from display unit (without NAVI) or display control unit
(with NAVI) to driver seat control unit.
-
Using CONSULT-II, the seat slide amount at entry/exit setting can be changed.
FAIL-SAFE MODE