FX35 RWD V6-3.5L (VQ35DE) (2003)
37.
Remove the "Catcher Bracket" Nuts on both sides of the Seat Adjust Assembly (2 nuts each side). See Figure 30a and Figure 30b.
38.
Remove the Seat Lifter Motor Assembly (5 Bolts & 2 Nuts). See Figure 31.
IMPORTANT:
Please pay close attention to the next step.
39.
Install the Seat Adjust Assembly back into the vehicle and tighten down all 4 seat anchor bolts.
^
This step is IMPORTANT to maintain proper alignment. It will secure the Seat Adjust Assembly during removal of the Lifter Link Assembly
(next step).