FX35 RWD V6-3.5L (VQ35DE) (2003)
42.
Place the new Lifter Link Assembly onto the Seat Adjust Assembly (see Figure 34). Then re-install the Seat Control Unit / Bracket onto the Seat
Adjust Assembly.
43.
Tighten the nuts for the Lifter Link Assembly to the specified torque:
^
8 mm Nuts: 17.6 - 26.5 Nm (1.79 - 2.7 kg.m, 12.98 - 19.5 ft-lb).
^
10 mm Nuts: 39 - 49 Nm (3.97 - 4.99 kg.m, 28.8 - 36 ft-lb).
NOTE:
Figure 35 shows the LH side of the Lifter Link Assembly only. Do the same tightening on the RH side.