FX35 RWD V6-3.5L (VQ35DE) (2003)
55.
Pull UP 2 connectors from the seat cushion and connect them to the corresponding connectors in the seat back (see Figure 45).
56.
Route the Harnesses down and under the LH side of the Seat Adjust Assembly (see Figure 46). Then attach both Harnesses to the Pipe Assembly
with new Clips (contained in the kit). See Figure 46.
^
Attach the larger diameter Harness to the Seat Adjust Assembly using a new Clip located near the BLUE tape.
^
Route the harnesses on the top side of the Pipe Assembly.