FX35 RWD V6-3.5L (VQ35DE) (2003)
Acceleration/Deceleration Sensor: Service and Repair
G SENSOR
REMOVAL
1. Remove center console.
2. Disconnect G-sensor harness connector.
3. Remove G-sensor mounting bolts. Then remove G-sensor from vehicle.
CAUTION:
^
Do not drop or strike G-sensor, because it has little endurance to impact.
^
Do not use power tool etc., because G-sensor is weak for the impact.
INSTALLATION
To install, follow procedure for removal in reverse order.
CAUTION:
^
Do not drop or strike G-sensor, because it has little endurance to impact.