FX35 RWD V6-3.5L (VQ35DE) (2003)
^
Install camshaft so that dowel pin hole and dowel pin on front end face are positioned as shown in figure. (No. 1 cylinder TDC on its
compression stroke)
NOTE: Large- and small-pin holes are located on front end face of intake camshaft, at intervals of 180°. Face small diameter side pin hole
upward (in cylinder head upper face direction).
4. Install camshaft brackets.
^
Remove foreign material completely from camshaft bracket backside and from cylinder head installation face.
^
Install camshaft bracket in original position and direction as shown in figure.
^
Install No. 2 to 4 camshaft brackets aligning the stamp marks as shown.
NOTE: There are no identification marks indicating left and right for No. 1 camshaft bracket.