FX35 RWD V6-3.5L (VQ35DE) (2003)
10. Loosen bolts in reverse order of illustration, and remove the intake manifold collector cover, gasket, intake manifold collector (lower) and gasket
with power tool.
INSPECTION AFTER REMOVAL
Surface Distortion
^
Using straightedge and feeler gauge, inspect the surface distortion of both the intake manifold collector (upper) and (lower).
Limit: 0.1 mm (0.004 inch)
^
If it exceeds the limit, replace the intake manifold collector.
INSTALLATION
Install in the reverse order of removal paying attention to the following
Part Installation Direction
Referring to front marks, install parts shown in figure.
Intake Manifold Collector (Lower)