FX35 RWD V6-3.5L (VQ35DE) (2003)
16. Install new O-rings on the rear timing chain case.
17. Install the front oil seal on the front timing chain case. Apply new engine oil to the oil seal edges.
^
Install it so that each seal lip is oriented as shown in figure.
^
Using a suitable drift, press-fit oil seal until it becomes flush with front timing chain case end face.
^
Make sure the garter spring is in position and seal lip is not inverted.
18. Install the water pump cover and the chain tensioner cover to front timing chain case.
^
Apply liquid gasket to front timing chain case front side as shown with tube presser [SST: WS39930000 ( -)].
Use Genuine RTV Silicone Sealant or equivalent.
19. Install front timing chain case as follows: