FX35 RWD V6-3.5L (VQ35DE) (2003)
SERVICE PROCEDURE
1.
Remove the clock from the dash.
^
Refer to the appropriate Service Manual (ESM) section DI or BT for clock removal.
2.
Replace the clock bulbs as follows:
A.
Refer to picture for the car you are working on.
B.
Turn the back of the bulbs counterclockwise about 1/4 turn to unlock them.
C.
Pull the old bulbs from the clock.
D.
Install the new bulbs and turn them clockwise about 1/4 turn to lock them in place.
3.
Reinstall the clock in the dash in reverse order.
4.
Set the clock to the correct time.
Disclaimer