infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Fuel Gauge Sender|Removal and Installation|Page 13238 > < Instruments - Fuel Gauge Won't Read Completely Full|Page 13235
Page 1
background image

Fuel Gauge Sender: Service and Repair
Removal and Installation

Removal And Installation

REMOVAL

WARNING:  Read "General Precautions" before working on the fuel system. Refer to "General Precautions".

 

1. Check fuel level on level gauge. If fuel gauge indicates more than the level shown in figure (full or almost full), drain fuel from fuel tank until fuel

gauge indicates level shown in figure.

-

In case fuel pump does not operate, take following procedure.
a. Insert fuel tube of less than 15 mm (0.59 in) in diameter into fuel filler tube through fuel filler opening to draw fuel from fuel filler tube. 
b. Disconnect fuel filler hose from fuel filler tube. Refer to "FUEL TANK". 
c. Insert fuel tube into fuel tank through fuel filler hose to draw fuel from fuel tank.  

-

As a guide, fuel level becomes the position shown in figure when approximately 20 liter (5-1/4 US gal, 4-3/8 Imp gal) of fuel are
drained from fuel tank.

Fuel Gauge Sender|Removal and Installation|Page 13238 > < Instruments - Fuel Gauge Won't Read Completely Full|Page 13235