FX35 RWD V6-3.5L (VQ35DE) (2003)
Center Mounted Brake Lamp Bulb: Service and Repair
High-Mounted Stop Lamp
BULB REPLACEMENT, REMOVAL AND INSTALLATION
1. Remove cap from back door finisher and remove nuts.
2. Disconnect high-mounted stop lamp connector.
3. Remove washer tube from high-mounted stop lamp, and remove high-mounted stop lamp from the rear air spoiler.
4. Remove seal packing from the rear air spoiler.
5. Install in the reverse order of removal.
High-mounted stop lamp : LED
CAUTION: Seal packing cannot be reused.