FX35 RWD V6-3.5L (VQ35DE) (2003)
Combination Switch: Scan Tool Testing and Procedures
Combination Switch Reading Function
For details refer to "COMBINATION SWITCH READING FUNCTION".
Consult-II Function
CONSULT-II Basic Operation
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF connect CONSULT-II and CONSULT-II CONVERTER to the data link connector then turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, go to "Precautions When Using CONSULT-II".