infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Ignition System - Misfire DTC's/Ignition Coils Blistered|Page 9623 > < Ignition System - Misfire DTC's/Ignition Coils Blistered|Page 9621
Page 3
background image

6. Replace the lower bolt at the RH steering member (support tube) mounting point (see Figure 1).

^ Locate the steering member RH mounting point.

^ Remove and discard the old lower mounting bolt.

^ Install a new lower mounting bolt.

^ New bolt is listed in the Parts Information (P/N 01456-00031).

^ The new bolt does not have a washer.

7. Reinstall the glove box in reverse order.

Ignition System - Misfire DTC's/Ignition Coils Blistered|Page 9623 > < Ignition System - Misfire DTC's/Ignition Coils Blistered|Page 9621