FX35 RWD V6-3.5L (VQ35DE) (2003)
ECM/IPDM E/R INTERNAL CIRCUIT INSPECTION
-
Remove ECM and IPDM E/R from vehicle.
-
Check resistance between ECM terminals 94 and 86.
-
Check resistance between IPDM E/R terminals 48 and 49
IPDM E/R Circuit Check (LAN-213)
IPDM E/R Ignition Relay Circuit Check
Check the following. If no problem is found, replace the IPDM E/R.
-
IPDM E/R power supply circuit. Refer to "IPDM E/R Power/Ground Circuit Inspection". See: Power and Ground Distribution/Power Distribution
Module/Testing and Inspection/Component Tests and General Diagnostics/IPDM E/R Power/Ground Circuit Inspection
-
Ignition power supply circuit. Refer to "IGNITION POWER SUPPLY - IGNITION SW. IN "ON" AND/OR "START"".