FX35 RWD V6-3.5L (VQ35DE) (2003)
Check Sheet Results (Example) Part 22
INSPECTION
Proceed with trouble diagnosis according to the check sheet results (example).
Case 1: Replace ECM.
Case 2: Replace A/T assembly.
Case 3: Replace display control unit.
Case 4: Replace low tire pressure warning control unit.
Case 5: Replace AWD control unit.
Case 6: Replace ICC unit.
Case 7: Replace Intelligent Key unit.
Case 8: Replace BCM. Refer to "Removal and Installation of BCM".
Case 9: Replace unified meter and A/C amp.
Case 10: Replace ABS actuator and electric unit (control unit).
Case 11: Replace driver seat control unit.
Case 12: Replace IPDM E/R.
Case 13: Check harness between TCM and data link connector. Refer to "Circuit Check Between TCM and Data Link Connector". See: CAN System
(Type 6)/Non-Trouble Code Procedures/Circuit Check Between Tcm and DLC
Case 14: Check harness between data link connector and unified meter and A/C amp. Refer to "Circuit Check Between Data Link Connector and Unified
Meter and A/C Amp.". See: CAN System (Type 6)/Non-Trouble Code Procedures/Circuit Check Between DLC and Unified Meter and A/C Amp.
Case 15: Check harness between unified meter and A/C amp. and ABS actuator and electric unit (control unit). Refer to "Circuit Check Between Unified
Meter and A/C Amp. and ABS Actuator and Electric Unit (Control Unit)". See: CAN System (Type 6)/Non-Trouble Code Procedures/Circuit CK.
Between Unified Meter, A/C Amp, ABS and Elect Unit
Case 16: Check harness between ABS actuator and electric unit (control unit) and driver seat control unit. Refer to "Circuit Check Between ABS
Actuator and Electric Unit (Control Unit) and Driver Seat Control Unit". See: CAN System (Type 6)/Non-Trouble Code Procedures/Circuit Check
Between ABS and Drivers Seat Control
Case 17: Check ECM circuit. Refer to "ECM Circuit Check". See: CAN System (Type 6)/Non-Trouble Code Procedures/ECM Circuit Check
Case 18: Check TCM circuit. Refer to "TCM Circuit Check". See: CAN System (Type 6)/Non-Trouble Code Procedures/TCM Circuit Check
Case 19: Check display control unit circuit. Refer to "Display Control Unit Circuit Check". See: CAN System (Type 6)/Non-Trouble Code
Procedures/Display Control Unit Circuit Check