FX35 RWD V6-3.5L (VQ35DE) (2003)
Side Air Bag: Service and Repair
Removal and Installation
Front Side Air Bag Module
REMOVAL
CAUTION:
-
Removal of front side air bag module should only be done to allow deployment of front side air bag module prior to disposal of seatback only.
Only complete seatback assemblies can be replaced.
-
Before servicing SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.
-
Always work from the rear of the front side air bag module.
1. Remove front seat.
2. Remove seatback trim and pad.
3. Remove front side air bag module harness clips.
4. Remove front side air bag module assembly fixing special nuts then remove front side air bag module assembly.
5. Remove front side air bag module fixing special nuts then remove front side air bag module from bracket.