FX35 RWD V6-3.5L (VQ35DE) (2003)
27.
Write the column assembly "lot number" onto the same position of the new Tilt Bracket with a permanent marker (oil based pen etc.). See Figure
9.
^
Do not peel off sticker & re-use onto the new Tilt Bracket.
The lot number printed on the old Tilt Bracket must be written on the same position of the new Tilt Bracket to maintain traceability.
28.
Install the new Tilt Bracket onto the Column Shaft (see Figure 10). Do not install bolts vet.